Tuesday, April 10, 2012

Common Questions concerning Syntek Fuel Treatment

Q. Will employing the Xtreme Fuel Treatment™ void the engine manufacturer’s warranty?

A. No, Engine manufactures cannot discriminate resistant to the using a fuel additive. Beneath the terms in the Magnuson-Moss Warranty act, engine manufacturers ought to take the position that the use of a fuel additive will not void the engine warranty unless it can be confirmed that the specific additive was the reason for the failure. Manufactures can assert that the use of specific additives might possibly prove useful.


Q. How does Xtreme Fuel Treatment™ work?

A. Xtreme Fuel Treatment™ consists of and oil soluble, organo-metallic compound which functions as a ‘burn rate modifier’ along with a ‘catalyst’ to lower the ignition point of fuel inside the combustion chamber. It reduces the temperature from the burn from 1200*F to 800*F which increases the length in the time in the fuel burn. This results inside a way more full burn of the readily available BTU’s in the fuel. The product also causes a reduction within the fuel droplet size which is injected in to the combustion chamber, thus escalating the surface location readily available to become burned. This results inside a a lot more full fuel burn, which adds horse power, increases mileage, reduces emissions and cleans the engine.

Q. What makes Xtreme Fuel Treatment™ distinctive from all the other additives out there?

A. Xtreme Fuel Treatment™ is often a confirmed fuel therapy, made use of within the mining business for the last 11 years. It's quite concentrated; a single gallon will treat ten,000 gallons of fuel. Not only does it have a combustion catalyst that will support boost fuel economy, Xtreme Fuel Treatment™ also has detergents, to eliminate harmful deposits from fuel pumps and injectors, lubricants to provide lubrication to pistons, fuel pumps, injectors and reduces friction, fuel stabilizers to prolong the life of stored fuel, polymerization retardant and dispersants to cut down sludge in fuel, rust and corrosion inhibitors to stop fuel process corrosion and demulsifiers to help lower water that types in fuel.

Q. Can I use lower grades of fuel when applying Xtreme Fuel Treatment™?

A. The Xtreme Fuel Treatment™ formula allows you to use the lowest octane fuel without the need of causing pings or lower engine efficiency.

Q. What happens if I put significantly more Xtreme Fuel Treatment™ in my tank than is recommended?

A. Over treating will not result in any negative effects on your engine. Yet, you can expect to not get improved results by working with a lot more from the formula. The advised treatment rate has verified to provide the best outcomes.

Money Back Guarantee
Syntek Global offers a 30 day, Money Back Guarantee (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient for one to try the product. If used correctly, XFT™ will produce results. If, after you have used the product for the minimum recommended time period, and are unhappy, contact Syntek Global to get your money back.

No comments:

Post a Comment