Highly Potent Fuel Additive - Vitamins for your Engine!

The active component within Xtreme Fuel Treatment has verified to cut down dangerous emissions levels and fuel consumption in several field tests, at the same time as recognized and approved EPA test facilities. These tests also prove that Xtreme Fuel Treatment chemistry is harmless to fuel properties and engine components, when decreasing deposit formation. The process utilized to measure the fuel consumption of two 2010 D 13 Volvo and one particular (1) 2009 D12 D Volvo tractors, is an adaptation with the US-EPA Federal Test Procedures (FTP) as well as the Australian Standards engineering technique AS2077-1982 called the Carbon Mass Balance. The system measures the fuel consumed by every single engine even though operating under steady-state or static engine conditions. The Bacharach Accurate Spot Smoke meter was utilised to identify the change in particulate emissions (soot). Further fuel consumption verification was provided by documentation secured inside the on-board truck computers.

The combined test fleet realized a 5.5% improvement in engine fuel efficiency using the Carbon Mass Balance evaluation, immediately after Xtreme Fuel Treatment. The identical engines knowledgeable a 20% reduction in particulate density (smoke reduction) with similar reductions in most other damaging emissions. Information offered by the on-board computer additional documented a six.25% improvement in fuel economic climate.



Money Back Guarantee

Syntek Global offers a 30 day, Money-back Guarantee (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient for one to try the product. If used correctly, XFT™ will produce results. If, after you have used the product for the minimum recommended length of time, and are not satisfied, contact Syntek Global to get your money back.

Testimonial 17% Improvement in diesel consumption with Syntek XFT

Farmers Plant Food ran tests with Xtreme Fuel Remedy on our Cummis 6.0 diesel generator. This generator uses 5.06 gallons of diesel an hour. On the very first test we added an 1/2 oz. of Xtreme Fuel Remedy with 20 gallons of fuel. The generator implemented four.four gallons an hour for this 1st test. The 2nd test we ran the exact same ratio of Xtreme Fuel Treatment and had the exact same results. The generator utilised four.four gallons an hour, again. The third test we put to use 1/4 oz. of Xtreme Fuel Remedy per 20 gallons plus the outcomes enhanced. The generator utilised 4.two gallons per hour. The diesel consumption seems to enhance eventually.

We believe the testing that we ran in incredibly correct as you will discover no variables involved. The generator runs in the exact same rpm’s all the time, very same electrical draw, no wind aspects to be considered, no traveling up and down hills. Everything stays consistence when operating this generator.


Money Back Guarantee

Syntek Global offers a 30 day, Money Back Guarantee (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient for you to try the product. If used correctly, XFT™ will produce outcomes. If, after you've used the product for the minimum recommended length of time, and are unhappy, contact Syntek Global to receive a refund.

Highly Potent Fuel Additive - Vitamins for your Engine!

The important component within Xtreme Fuel Treatment™ has proven to lessen harmful emissions levels and fuel consumption in several field tests, at the same time as recognized and authorized EPA test facilities. These tests also prove that Xtreme Fuel Treatment chemistry is harmless to fuel properties and engine components, whilst reducing deposit formation. The test process summarized in this document outlines a rigorous study performed having a regional trucking corporation. This study additional documents the fuel savings potential from the fuel catalyst chemistry.

The process employed to measure the particular fuel consumption of this trucking enterprise test fleet was a test method referred to as the Carbon Mass Balance (CMB) test procedure. This process determines the fuel consumed even though measuring the distinct carbon within the raw fuel and comparing that towards the carbon content material in the exhaust stream. The CMB process is internationally recognized by all the leading test facilities inside the planet. With this method, fuel consumption might be additional accurately determined devoid of any outside influence from climate adjustments, driver adjustments, load differences, tire pressure differences, fuel density changes, etc.

The test fleet consisted of 2005 Kenworth trucks, with 475 horsepower C15 Caterpillar engines. The test fleet realized a fuel economic climate improvement of 5.5% having a corresponding reduction in observable smoke levels, emissions levels and maintenance expenses.


Money Back Guarantee
Syntek Global offers a 30 day, Refund Policy (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient so that you can try the product. If used correctly, XFT™ will produce outcomes. If, after you've used the product for the minimum recommended length of time, and are unhappy, contact Syntek Global to receive your money back.

Increase Your Fuel Economy with Xtreme Fuel Treatment

Xtreme Fuel Treatment™ (XFT™) is the most beneficial, most concentrated fuel additive readily available available on the market at present. Under no circumstances has there been an individual product which can give increased fuel efficiency, decreased dangerous emissions and maximum engine protection in a single application. XFT™ gives all of the following benefits:


Fuel Catalyst
XFT™ makes use of Organo-metallic Chemistry to create a Catalyst or “Burn Rate Modifier” made use of to atomize the fuel by breaking it up into smaller sized particles. Smaller sized particles of fuel burn less complicated and quicker than bigger particles of fuel.

Fuel Stabilizer
XFT™ consists of potent fuel stabilizers that not just keeps fuel stable for days or weeks (like other equivalent goods), but will preserve fuel stable for years.

Demulsifier
XFT™ separates water caused by condensation from the fuel and fuel tanks. Water could be the major lead to of fuel injector failure in combustion engines, which lead to larger upkeep fees.

Polymerization Retardant
XFT™ prohibits solids from forming and reduces sludge buildup which can clog filters. Sludge may be the major lead to of plugged fuel filters, which lead to larger maintenance expenses.

Lubricant
XFT™ replaces lubricants that had been removed from the introduction of Ultra-low Sulfur Diesel (ULSD). As of June 2010, only USLD could be sold in the US, UK and Australia and it truly is advised by manufacturers that lubricants be added to the fuel of all industrial engines utilizing USLD fuel.

Detergent
XFT™ cleans fuel injectors and fuel pumps and eliminates carbon develop up.

Corrosion Inhibitor
XFT™ prevents harm caused by oxidation and rust in fuel systems and fuel tanks.

Money Back Guarantee

Syntek Global offers a 30 day, Refund Policy (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient for you to try the product. If used correctly, XFT™ will produce outcomes. If, after you have used the item for the minimum recommended length of time, and are unhappy, contact Syntek Global to receive a refund.

Fuel Additive, EPA Registered, Save up to 30% MPG

Xtreme Fuel Treatment™ is actually a item patented and time tested for practically two decades in industrial markets around the globe. Extensive testing and overall performance measurement information prove that it really works! Until these days this product has only been applied in massive industrial applications and has only been sold in bulk quantities. Now, for the very first time ever, XFT is obtainable to the common public for use in all varieties of engines.

Xtreme Fuel Treatment™ contains an oil soluble organo-metallic compound which functions as a ‘burn rate modifier’ and a ‘catalyst’ to lower the ignition point of fuel inside the combustion chamber by a number of hundred degrees. Simply stated, this implies that the fuel burns longer and a lot more efficiently, causing your engine to burn additional with the available fuel it gets in lieu of less of it.

What does this mean to you? Enabling a even more full burn approach signifies you use less fuel for the reason that you're using the available fuel even more effectively. This signifies greater gas mileage and revenue saved!

A significantly more total burn method enhances the obtainable horsepower and torque, thereby enhancing your vehicle’s power. A greater burn also outcomes in much less carbon buildup on engine components and much less emissions from the exhaust pipe. Much less carbon buildup indicates much less wear on the enginethat will result in fewer repairs and extended engine life.

Just a quarter ounce of XFT™ treats as much as 20 gallons of fuel making this product the most complete fuel treatment out there. Making use of XFT™ makes it possible for making use of lower octane gas without any reduce in engine performance!

Money Back Guarantee

Syntek Global offers a 30 day, Money-back Guarantee (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient for you to try the product. If used correctly, XFT™ will produce results. If, after you have used the product for the minimum recommended length of time, and are not satisfied, contact Syntek Global to have a refund.

Fuel Additive, EPA Registered, Save up to 30% MPG

Xtreme Fuel Treatment™ consists of a fuel catalyst known as a ‘burn rate modifier’. The burn rate modifier reduces ignition delay, which delivers a substantial, corresponding reduction in combustion temperature. By lowering ignition delay, the fuel reacts to combustion faster, allowing to get a longer, far more full burn. This improved combustion results in burning alot more in the attainable BTU’s from the fuel. A more full burn improves engine efficiency, reduces harmful emissions substantially, and reduces fuel usage.

Enabling a additional complete burn procedure indicates you use much less fuel and consequently enhance your trucks fuel mileage. A additional complete burn process increases the out there horsepower and torque, thereby improving your engine’s power. A far better burn also outcomes in much less carbon buildup on engine components and fewer emissions from the exhaust pipe. Much less carbon buildup implies much less put on on the engine which can produce fewer repairs and extended engine life.

XFT™’s one of a kind formula consists of countless ingredients, every designed to get a precise objective:

Combustion Catalyst - Extends the burn rate of fuel throughout combustion to supply a a great deal more complete fuel burn resulting in increased gas mileage, fewer damaging emissions and much less carbon buildup on engine components.

Detergents - Removes dangerous deposits from fuel pumps, injectors and throughout the fuel program.

Lubricants - Gives lubrication to pistons, fuel pumps and injectors, decreasing friction and prolonging the working life with the engine.

Fuel Stabilizer - Prolongs the life of stored fuel; best for seldom made use of gear.

Polymerization Retardant & Dispersant - Reduces sludge buildup in fuel which can plug filters.

Rust and Corrosion inhibitor - Prevents tank and fuel system corrosion because of oxidation and condensation.

Demulsifier - Helps remove water from fuel.

Money Back Guarantee

Syntek Global offers a 30 day, Refund Policy (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient for you to try the item. If used correctly, XFT™ will produce results. If, after you've used the item for the minimum recommended time period, and are not happy, contact Syntek Global to get a refund.

Xtreme Fuel Treatment - EPA Registered - Boost Fuel Economy

Xtreme Fuel Treatment™ consists of a fuel catalyst referred to as a ‘burn rate modifier’. The burn rate modifier reduces ignition delay, which gives a considerable, corresponding reduction in combustion temperature. By reducing ignition delay, the fuel reacts to combustion quicker, allowing to get a longer, a great deal more full burn. This improved combustion outcomes in burning extra with the available BTU’s from the fuel. A way more complete burn improves engine efficiency, reduces dangerous emissions drastically, and reduces fuel usage.

Enabling a much more full burn approach signifies you use less fuel and consequently increase your trucks fuel mileage. A more complete burn approach increases the obtainable horsepower and torque, thereby enhancing your engine’s power. A far better burn also outcomes in less carbon buildup on engine components and fewer emissions from the exhaust pipe. Less carbon buildup signifies much less put on around the engine which may translate into fewer repairs and extended engine life.

XFT™ is often a break-through item which produces results in four crucial categories:

1. Increases Gas Mileage

Reduces fuel consumption resulting in increased miles per gallon.*

2. Prolongs Engine Life & Reduces Engine Wear

A cleaner and additional lubricated engine suggests longer engine life and reduced put on.

3. Improves Vehicle Overall performance & Horsepower:

Burns even more of the on the market BTU’s in the fuel which results in better overall performance.

4. Reduces Dangerous Emissions & Pollutants:

Lowering dangerous pollutants out of the exhaust pipe outcomes in a cleaner environment.

*Studies show a considerable improve in fuel economy and engine life as well as environmental benefits. However, individual results may very dependant upon driving habits, age of vehicle, weather, traffic, terrain as well as other variances.

Money Back Guarantee

Syntek Global offers a 30 day, Money-back Guarantee (less shipping & processing charges) on Xtreme Fuel Treatment to make it convenient so that you can try the product. If used correctly, XFT™ will produce outcomes. If, after you have used the product for the minimum recommended time period, and are unsatisfied, contact Syntek Global to have a refund.